Hand Tools
Open-Jaw Wrenches (Spanners)
Strategic Recommendations for Open-Jaw Wrenches (Spanners) – IS 2028:2004
- Start BIS Certification Immediately
Prepare for mandatory compliance under the Hand Tools (Quality Control) Order, 2025. General Manufacturers (other than Micro & Small Enterprises) must comply from 1 October 2026, Small Enterprises from 1 January 2027, and Micro Enterprises from 1 April 2027. Early action helps avoid last-minute certification delays and market disruptions. - Engage ERA Compliance, Experts
Partner with the ERA Compliance Team for BIS application filing, applicable testing coordination, technical documentation, inspection readiness, and BIS Standard Mark compliance under IS 2028:2004. Our end-to-end support helps streamline the certification process and maintain regulatory alignment. - Reach Out for Support
cs@eraglobal.co.in |
+91 9599296331 |
WhatsApp Support
Get expert assistance with BIS certification, documentation, testing coordination, and compliance timelines for Open-Jaw Wrenches. - Track QCO Notifications & Updates
Regularly monitor Gazette notifications, BIS updates, amendments and regulatory clarifications affecting hand tools. - Subscribe to the ERA Newsletter to stay informed about important compliance developments and enforcement updates.
- Ensure BIS Standard Mark Compliance
Ensure covered Open-Jaw Wrenches conform to IS 2028:2004 and meet the applicable BIS Standard Mark and licensing requirements under Scheme-I before the relevant enforcement date.

| Section | Details |
|---|---|
| Product Name | Open-Jaw Wrenches (Spanners) |
| Applicable Indian Standard (IS) No. | IS 2028:2004 |
| Title of Indian Standard | Open-Jaw Wrenches (Spanners) – Specification |
| Quality Control Order | Hand Tools (Quality Control) Order, 2025 |
| Notification & Amendments | S.O. 5596(E), dated 4 December 2025, issued under Section 16 of the Bureau of Indian Standards Act, 2016. It supersedes S.O. 3385(E), dated 22 July 2025, which had superseded the 2024 Order. |
| Final Enforcement Date | General Manufacturers (other than Micro & Small Enterprises): 1 October 2026; Small Enterprises: 1 January 2027; Micro Enterprises: 1 April 2027. |
| Objective & Scope | To require covered Open-Jaw Wrenches to conform to IS 2028:2004 and bear the BIS Standard Mark under a BIS licence as per Scheme-I. |
| Products Covered | Open-Jaw Wrenches (Spanners) covered under IS 2028:2004. |
| Exemptions | Domestically manufactured goods/articles for export are exempt. Up to 200 goods/articles per year imported by manufacturers of hand tools for R&D are also exempt, subject to the conditions specified in the Order. |
| Industries Impacted | Hand Tool Manufacturing, Automotive & Engineering, Construction, Mechanical Workshops, Industrial Maintenance and Hardware sectors. |
| Mandatory Compliance | Conformity to IS 2028:2004 + applicable BIS licence + BIS Standard Mark under Scheme-I. |
| Next Steps for Stakeholders | Verify applicability under IS 2028:2004; conduct applicable testing; prepare BIS documentation; obtain the applicable BIS licence; and align manufacturing, labelling and marking processes with BIS requirements. |
| Legal Framework Provision & Enforcement | Issued under Section 16 of the Bureau of Indian Standards Act, 2016. BIS is the certification and enforcement authority. |
| Penalties | Any person contravening the Order shall be punishable under the provisions of the Bureau of Indian Standards Act, 2016. |
| Conclusion | Mandatory BIS Standard Mark requirements for Open-Jaw Wrenches covered under IS 2028:2004 commence on 1 October 2026 for general manufacturers, 1 January 2027 for small enterprises and 1 April 2027 for micro enterprises, subject to the exemptions specified in the Order. |
| References/Annexures | Hand Tools (Quality Control) Order, 2024 – S.O. 4183(E); Hand Tools (Quality Control) Order, 2025 – S.O. 3385(E); Hand Tools (Quality Control) Order, 2025 – S.O. 5596(E). |
Notification
Open-Jaw Wrenches (Spanners) covered under IS 2028:2004 are regulated under the Hand Tools (Quality Control) Order, 2025 – S.O. 5596(E), dated 4 December 2025. The current Order supersedes the earlier Hand Tools QCO issued vide S.O. 3385(E), dated 22 July 2025, which had superseded the 2024 Order. The Order is issued under Section 16 of the Bureau of Indian Standards Act, 2016.
Enforcement Timeline
The mandatory compliance requirement for covered Open-Jaw Wrenches follows a phased implementation schedule. General Manufacturers other than Micro and Small Enterprises are required to comply from 1 October 2026, while Small Enterprises must comply from 1 January 2027 and Micro Enterprises from 1 April 2027.
Overview
IS 2028:2004 covers Open-Jaw Wrenches (Spanners), which are commonly used for tightening and loosening nuts and bolts in mechanical, automotive, engineering and industrial applications. The regulatory requirement is intended to ensure that covered products meet the applicable Indian Standard and maintain consistent quality and performance.
Objective & Scope
The objective of the Hand Tools QCO is to ensure that covered Open-Jaw Wrenches conform to the requirements of IS 2028:2004. The applicable products are required to bear the BIS Standard Mark under a BIS licence in accordance with Scheme-I of Schedule-II to the BIS (Conformity Assessment) Regulations, 2018, from the applicable enforcement date.
Products Covered
The requirement applies to Open-Jaw Wrenches (Spanners) covered under IS 2028:2004. Manufacturers and other stakeholders should verify the product’s specifications and applicability against the requirements of the relevant Indian Standard before placing the product in the Indian market.
Exemptions
The Order provides an exemption for goods or articles manufactured domestically for export. It also provides an exemption for up to 200 goods or articles per year imported for research and development by manufacturers of hand tools, subject to the conditions prescribed under the Order, including restrictions on commercial sale and applicable record-keeping requirements.
Industries Impacted
The requirement is particularly relevant to hand-tool manufacturers, automotive and engineering workshops, construction companies, mechanical maintenance businesses, industrial users and hardware suppliers dealing with Open-Jaw Wrenches. Businesses involved in manufacturing, importing or supplying covered products should assess their compliance obligations before the applicable enforcement date.
Mandatory Compliance Requirements
Covered Open-Jaw Wrenches must conform to IS 2028:2004 and comply with the applicable BIS licensing and Standard Mark requirements under Scheme-I. Manufacturers should complete applicable testing, technical documentation, quality-control preparations, labelling and marking requirements and obtain the applicable BIS licence before the relevant implementation date.
Next Steps for Stakeholders
Manufacturers and stakeholders should first verify whether their products fall within the scope of IS 2028:2004, followed by applicable testing and preparation of BIS documentation. They should also ensure that production, packaging, labelling and BIS Standard Mark requirements are aligned with the applicable conformity-assessment requirements well before the enforcement deadline.
Legal Provisions, Enforcement & Penalties
The Hand Tools (Quality Control) Order, 2025 is issued under Section 16 of the Bureau of Indian Standards Act, 2016, with BIS responsible for certification and enforcement. The QCO provides that any person contravening its provisions shall be punishable under the provisions of the Bureau of Indian Standards Act, 2016. Specific penalties should therefore be stated only with reference to the relevant provisions of the BIS Act.
Conclusion
Open-Jaw Wrenches (Spanners) covered under IS 2028:2004 are subject to mandatory BIS Standard Mark requirements under the Hand Tools (Quality Control) Order, 2025. Compliance applies from 1 October 2026 for general manufacturers other than Micro and Small Enterprises, 1 January 2027 for Small Enterprises, and 1 April 2027 for Micro Enterprises, subject to the exemptions provided under the Order.“
Ready to start your certification journey?
Let us help you navigate regulatory challenges and achieve certification with ease. Leave us your details, and we’ll get back to you—or request a free consultation today.
